Peeler Centrifuges - Horizontal Filtration Design
Peeler Centrifuges use the principle of centrifugal force to separate solids from liquids through density differences. unique to the Peeler Centrifuge is the constant basket speed, which allows all operations to be performed at full basket speed.
centrifugal pumps use the principle of centrifugal force to separate solids from liquids through density differences. unique to the Peeler Centrifuge is the constant basket speed, which allows all operations to be performed at full basket speed.
The HUADA Peeler Centrifuge can be used for both intermittent and continuous centrifuge processes. The process is designed to achieve maximum removal of solids from liquids, which may need to be as pure as possible and cannot be easily separated by their density differences.
The advantages are: increased productivity, reduced energy consumption, superior product performance, increased throughput, and avoidance of emissions.
Applications
Horizontal peeling centrifuges are successfully used in the food, pharmaceutical, plastics, organic and inorganic chemical industries to separate solids from solid-liquid slurries with solids contents of 5% to 50% and particle sizes ranging from 2 microns to 10 mm. Products that are difficult to filter or decant can be easily separated with Peeler centrifuges.
Peeler centrifuges are used to
Separate materials such as sodium bicarbonate, caustic soda, starch, boric acid, ammonium sulfide, sulfuric acid, sodium sulfate, ferrous sulfate, calcium phosphate, polyvinyl alcohol Chloride, sodium chloride and potassium chloride.
Design features
The door and base fit flange adopt dovetail groove design, full hydraulic locking door and double locking protection design, reliable sealing.
The overall structure adopts airtight and explosion-proof design, which meets the GMP standard and the application requirements of flammable and explosive places in pharmaceutical industry.
Equipped with filter cake layer controller to effectively control the thickness of the material layer, prevent overload operation and avoid material overflow.
Equipped with detachable wear-resistant hard alloy blades to prolong service life.
Adopt spiral discharge to ensure high collection rate of filter cake and effectively prevent material blockage.
The equipment is supported by front and rear rolling bearings, with high rigidity and low rotary resistance.
The stripper support is welded and polished as a whole, with high structural strength and rigidity to ensure smooth scrapping.
Large load-bearing capacity, good vibration damping effect, dynamic load active isolation, no need to hit the foundation, more convenient installation.
Vibration damper effectively improves the vibration isolation capacity and enhances the safety and stability of equipment operation.
GKF Pharma Peeler Centrifuges
Process cycle
1 Feeding, the suspension is fed from the storage tank to the rotating basket at full speed.
2 Removal of the mother liquor, which is discharged from the solids by means of a filter element (usually a filter cloth) under the influence of centrifugal force. The solids are collected in the basket as "cake".
3 Washing, if required to remove traces of mother liquor, washing facilities can be provided to thoroughly wash the solids during the separation process.
4 Re-drying, where the solids are allowed to dry further after washing or other treatment.
5 Discharge, where the solids are "stripped" by a full basket width scraper and discharged through a chute in the front cover of the machine or conveyed by a discharge screw.
HUADA is the leading manufacturer of centrifuges in China. Over the years, always focus on the research and development, production and sales of filtration and separation machinery, to provide each customer with focused solutions to solid-liquid separation problems.
