Heat Shrink Direct® – Heat Shrink Tubing

CAB™ technology’s heat-shrink printer/cutter the A4+M is leading the pack in comprehensive low cost, quality Heat Shrink marking & cutting.  Since 1975 CAB has been setting new technological benchmarks in developing and manufacturing devices and systems for advance heat shrink printing and cutting applications. The A4+M Center- Aligned machine is built to last, and holds up to continuous use in harsh industrial environments.

With the increased use of identification markers for wire and cable, the A4+M is cuts down on wasted material and manual labor by printing and cutting various sized identification sleeves with ease. Print and cut to size, no more manually pulling apart of pre-printed oversized marker sleeves. A permanent cost savings solution to a timely process.

For heat-shrink 3.5 – 110mm wide (0.138″ – 4.33″), the built-in centered material guide allows for no adjustment of the print head for different widths of materials. This feature allows for easy change-out on short runs, and less downtime, saving customers time & money. The A4+M fills a much needed market demand for an easy to adjust, quality printer/cutter for continuous heat shrink tubing and marker sleeve applications.

Other important key features of the A4+M include:

• Comprehensive interface (big display graphic)

• Easy adjustment of frequently changing materials from 3.5 – 110mm (0.138″ – 4.33″).

• Excellent for flat pressed heat shrink tubes

• Cost saving features include custom print ribbons for your specific material width (no costly over-sized ribbons)

• Prints hi-quality alphanumeric codes, bar codes and graphics

• Only one tool for all maintenance tasks (the Allen key).

A4+M Center Aligned heat Shrink Printer/Cutter

Base machine includes: Label printer, CU4 Straight Cutter Head, Power supply, Operation manual, Windows driver, cablabel R2 Lite, Service manual on CD-ROM The A4+M Center- Aligned machine is built to last, and holds up to continuous use in harsh industrial environments. With the centered material guide there is no adjustment of the print head needed for different widths of materials – This feature allows for easy change-out on short runs, and less downtime, saving our customers time & money. The A4+M fills a much needed market demand for an easy to adjust, quality printer/cutter for continuous heat shrink tubing applications.

Suggested Use:

Benefits & Features

BIG GRAPHIC DISPLAY

White backlight guarantees optimal legibility.

RIBBONRETAINER

Easy and centered insertion of the ribbon with the Three part tightening axles. Due to the imprinted spacer, positioning of the ribbon is facilitated.

EASY ADJUSTMENT

The print head is pressed down with two sliding toggles. One is mounted to the left label margin, the other one is pushed to the right label margin.

MATERIAL GUIDE

Precise printing due to the material guide located directly behind the print roller. The width is adjusted with a spindle.

SOLID CHASSIS It is made of dye-cast aluminium. All devices are assembled to it.

ONLY ONE TOOL FOR ALL MAINTENANCE TASKS

The Allen key

Graphic Formats: PCX, IMG, BMP, TIF, MAC, GIF, PNG