Three-dimensional-printed molds and materials for injection molding and rapid tooling applications

Crossref Citations

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

Galeja, Mateusz Wypiór, Klaudiusz Wachowicz, Jan Kędzierski, Przemysław Hejna, Aleksander Marć, Mariusz Klewicz, Krzysztof Gabor, Jadwiga Okła, Hubert and Swinarew, Andrzej Szymon 2020. POM/EVA Blends with Future Utility in Fused Deposition Modeling. Materials, Vol. 13, Issue. 13, p. 2912.

Tijing, Leonard D. Dizon, John Ryan C. Ibrahim, Idris Nisay, Arman Ray N. Shon, Ho Kyong and Advincula, Rigoberto C. 2020. 3D printing for membrane separation, desalination and water treatment. Applied Materials Today, Vol. 18, Issue. , p. 100486.

Delda, Ray Noel M. Tuazon, Brian Jumaquio and Dizon, John Ryan Cortez 2020. Assessment of Interfacial Adhesion of Adhesively Bonded 3D-Printed Thermoplastics. Materials Science Forum, Vol. 1005, Issue. , p. 157.

Tuazon, Brian Jumaquio Espino, Michaela Tayag and Dizon, John Ryan Cortez 2020. Investigation on the Effects of Acetone Vapor-Polishing to Fracture Behavior of ABS Printed Materials at Different Operating Temperature. Materials Science Forum, Vol. 1005, Issue. , p. 141.

Espino, Michaela Tayag Tuazon, Brian Jumaquio Robles, Gerald Sanqui and Dizon, John Ryan Cortez 2020. Application of Taguchi Methodology in Evaluating the Rockwell Hardness of SLA 3D Printed Polymers. Materials Science Forum, Vol. 1005, Issue. , p. 166.

Dizon, John Ryan Cortez Valino, Arnaldo D. Souza, Lucio R. Espera, Alejandro H. Chen, Qiyi and Advincula, Rigoberto C. 2020. 3D Printed Injection Molds Using Various 3D Printing Technologies. Materials Science Forum, Vol. 1005, Issue. , p. 150.

Advincula, Rigoberto C. Dizon, John Ryan C. Chen, Qiyi Niu, Ivy Chung, Jason Kilpatrick, Lucas and Newman, Reagan 2020. Additive manufacturing for COVID-19: Devices, materials, prospects, and challenges. MRS Communications, Vol. 10, Issue. 3, p. 413.

García-Ávila, Josué Rodríguez, Ciro A. Vargas-Martínez, Adriana Ramírez-Cedillo, Erick and Martínez-López, J. Israel 2021. E-Skin Development and Prototyping via Soft Tooling and Composites with Silicone Rubber and Carbon Nanotubes. Materials, Vol. 15, Issue. 1, p. 256.

Zhang, Haiguang Huang, Tinglong Jiang, Qixiang He, Lanlan Bismarck, Alexander and Hu, Qingxi 2021. Recent progress of 3D printed continuous fiber reinforced polymer composites based on fused deposition modeling: a review. Journal of Materials Science, Vol. 56, Issue. 23, p. 12999.

Dizon, John Ryan C. Gache, Ciara Catherine L. Cascolan, Honelly Mae S. Cancino, Lina T. and Advincula, Rigoberto C. 2021. Post-Processing of 3D-Printed Polymers. Technologies, Vol. 9, Issue. 3, p. 61.

Vieten, Tobias Zanin, Davide Knöller, Andrea Litwin, Thomas Eberhardt, Wolfgang and Zimmermann, André 2021. Soft Tooling-Friendly Inductive Mold Heating—A Novel Concept. Micromachines, Vol. 12, Issue. 4, p. 454.

Kumar, Kandambath Padinjareveetil Akshay and Pumera, Martin 2021. 3D‐Printing to Mitigate COVID‐19 Pandemic. Advanced Functional Materials, Vol. 31, Issue. 22, p. 2100450.

Garrido, Julio Silva, Diego Portela, Bruno and Lekube, Blanca 2021. Integrated User-Oriented Service for 3D Printing Environments with Recycled Material from Maritime Plastic Waste. Applied Sciences, Vol. 11, Issue. 9, p. 3787.

Surace, Rossella Basile, Vito Bellantone, Vincenzo Modica, Francesco and Fassi, Irene 2021. Micro Injection Molding of Thin Cavities Using Stereolithography for Mold Fabrication. Polymers, Vol. 13, Issue. 11, p. 1848.

Doyle, Stephanie E. Duchi, Serena Onofrillo, Carmine Quigley, Anita Di Bella, Claudia Pirogova, Elena and O'Connell, Cathal D. 2021. Printing between the Lines: Intricate Biomaterial Structures Fabricated via Negative Embodied Sacrificial Template 3D (NEST3D) Printing. Advanced Materials Technologies, Vol. 6, Issue. 7, p. 2100189.

Delda, Ray Noel Medina Basuel, Rex Balisalisa Hacla, Rodel Peralta Martinez, Dan William Carpiano Cabibihan, John-John and Dizon, John Ryan Cortez 2021. 3D Printing Polymeric Materials for Robots with Embedded Systems. Technologies, Vol. 9, Issue. 4, p. 82.

Ledford, William K. Sabury, Sina and Kilbey, S. Michael 2021. Enhancing nanomaterial dispersion and performance of parts printed via FFF by a solution casting method. MRS Communications, Vol. 11, Issue. 2, p. 122.

Strano, Matteo Rane, Kedarnath Farid, Muhammad Asad Mussi, Valerio Zaragoza, Veronica and Monno, Michele 2021. Extrusion-based additive manufacturing of forming and molding tools. The International Journal of Advanced Manufacturing Technology, Vol. 117, Issue. 7-8, p. 2059.

Vieten, Tobias Stahl, Dennis Schilling, Peter Civelek, Faruk and Zimmermann, André 2021. Feasibility Study of Soft Tooling Inserts for Injection Molding with Integrated Automated Slides. Micromachines, Vol. 12, Issue. 7, p. 730.

Georgopoulou, Antonia Michel, Silvain and Clemens, Frank 2021. Sensorized Robotic Skin Based on Piezoresistive Sensor Fiber Composites Produced with Injection Molding of Liquid Silicone. Polymers, Vol. 13, Issue. 8, p. 1226.