Bao, L., Liu, W.J., Wang, B., Li, H., You, X., Zhou, Q., Liu, M., & Gao, S. (2020). Experimental investigation on partition controllable induction heating-hot stamping process of high-strength boron alloyed steel plates with designable temperature patterns. Journal of Materials Research Technology, 9(6), 13963-13976.
Frank, B., Herbas–Torricco, B., & Schvaneveldt, S.J. (2021). The AI-extended customer: Technology, consumer, country differences in the formation of demand for AI-empowered consumer products. Technological Forecasting and Social Change, 172, Article 121018.
Kheybari, S., & Ishizak, A. (2022). The behavioral best-worst method. Expert Systems with Applications, 209, Article 118265.
Li, C., Lai, Z., Wang, C., Gao, Y., Wang, Z., Cao, Q., Han, X., & Li, L. (2022). Toward better metal flow control in electrohydraulic sheet forming by combining with electromagnetic approach. Journal of Materials Processing Technology, 299, Article 117343.
Lazzarotto, L., Dubar, L., Dubois, A., Ravassard, P., Bricout, J.P., & Oudin, J. (1998). A selection methodology for lubricating oils in cold metal forming processes. Wear, 215(1-2),1-9.
Long, H., Mynors, D.J, Holland, P., & Standring, P.M. (2022). Forming feature representation and process selection in cold extrusion. Journal of Materials Processing Technology, 125(1), 456-463.
Long, H., Mynors, D.J., Holland, P., & Standring, P. (2004). Knowledge-based process selection for rotationally symmetric and rotationally non-symmetric components in cold forming. Journal of Materials Processing Technology, 153-154, 338-345.
Okponyia, K.O., & Oke, S.A. (2020). Exploring aluminium alloy metal matrix composites in EDM using coupled factor-level-present worth analysis and fuzzy analytic hierarchy process. International Journal of Industrial Engineering and Engineering Management, 2(1), 25-44.
Rao, R.V. (2004). Evaluation of metal stamping layouts using an analytic hierarchy process method. Journal of Materials Processing Technology, 152(1), 71-76.
Ringen, G., Welo, T., & Brewit, S.M. (2022). Rapid manufacturing of die-casting tools: A case study. Procedia CIRP, 107, 1565- 1570.
Saaty, T. L. (1990). How to make a decision: The analytic hierarchy process. European Journal of Operational Research, 48(1), 9-26.
Shrivastava, A., Ahmed, M., & Kumar, D.R. (2019). Optimization of process parameters in electrohydraulic forming using Taguchi method. ISME journal of Manufacturing Sciences, 8(1), 1-12.
Stöbener, D., Alexe, G., Langstädtler, L., Herrmann, M., & Fischer, A. (2020). An optical method to determine the strain field on micro samples during electrohydraulic forming.
Procedia CIRP, 87, 438-443.
Wang, G., & Bos, J. (2018). A study on joining magnesium alloy high pressure die casting components with thread forming fasteners. Journal of Magnesium and Alloys, 6(2), 114-120.
Woo, M., Noh, H., Song, W., Kang, B., & Kim, J. (2017a). Development of electrohydraulic forming apparatus and its experimental study. Transactions of The Korean Society of Automotive Engineers, 25(2), 236-241.
Woo, M., Noh, H., Song, W., Kang, B., & Kim, J. (2017b). Experimental validation of numerical modeling of electrohydraulic forming using an al 5052-H34 sheet. The International Journal of Advanced Manufacturing Technology, 93(5-8), 1819-1828.
Woo, M.A., Kim, H.K., Park, H.G., Kim, Y.H., & Kim, J. (2017c). Numerical and experimental study on electrohydraulic forming process. Procedia Engineering, 207, 311-316.
Woo, M., Moon, Y., Song, W., Kang, B., & Kim, J. (2019a). Acquisition of dynamic material properties in the electrohydraulic forming process using artificial neural network. Materials, 12(21), 3544-3560.
Woo, M., Song, W., Kang, B., & Kim, J. (2019b). Acquisition and evaluation of theoretical forming limit diagram of Al 6061-T6 in electrohydraulic forming process. Metals, 9(4), 401-415.
Woo, M., Lee, K., Song, W., Kang, B., & Kim, J. (2020). Numerical estimation of material properties in the electrohydraulic forming process based on a Kriging surrogate model. Mathematical Problems in Engineering, 2020, Article 3219829.
Wu, J., Wang, Y., Shafiee, S., & Zhang, D. (2021). Discovery of associated consumer demands: Construction of a co-demanded product network with community detection. Expert Systems with Applications, 178, Article 115038.
Zhao, S., Wei, Z., Wang, P., Ma, T., & Guo, K. (2022). An objective evaluation method for automated vehicle virtual test. Expert Systems with Applications, 206, Article 117940.
Zheng, Q., & Yu, H. (2020). Hyperplasticity mechanism in DP600 sheets during electrohydraulic free forming. Journal of Materials Processing Technology, 279, Article 116582.
Zia, M., Fazli, A., & Soltanpour, M. (2017). Warm electrohydraulic forming: A novel high speed forming process. Procedia Engineering, 207, 323-328.
Zohoor, M., & Mousavi, S.M. (2018). Experimental analysis and smoothed particle hydrodynamics modeling of electrohydraulic forming of sheet metal parts. Journal of Manufacturing Processes, 35, 16-28.
For more information 1100 aluminum sheet, please get in touch with us!