Life plagues us with so many choices these days: paper or plastic? Tea or coffee? Italian or burgers? We have similar options when it comes to our vehicle’s oil. Conventional or synthetic? High-quality oil filter or basic?
While many vehicles may require full synthetic oils, some cars that use conventional oil can upgrade to full synthetic oil. The same goes for oil filters. Oil filter manufacturers make various grades of oil filters from good to better to best.
Oil is an essential component in your vehicle, and the oil filter is just as important. Unfiltered oil collects particles and debris that are harmful to the engine, including oil pump components, pistons, and the surfaces of bearings.
An oil filter also helps maintain oil pressure in the engine when it transitions from inactive to starting up. Superior-quality filters have improved features, such as pressure relief valves and filtering elements that trap smaller particles.
The oil filter has two jobs: filter waste and ensure oil stays within the engine.
Oil that is clean and free of debris keeps your engine cleaner for a more extended period, giving your engine better overall performance. The oil filter removes waste such as dirt, debris, and bits of metal from the oil to help prevent damages to the engine. It also prevents backflow and dispenses unfiltered oil to warm the engine in cooler weather.
There are many types of oil filters on the market. How do you choose the best one for your vehicle?
Your selection depends on your vehicle’s engine type and your manufacturer’s recommendation. These are the four main types of oil filters:
This petroleum-based crude oil comes from underground and is less expensive. However, conventional oil is more reactive to changes in temperature by thickening in colder weather and thinning when hot.
They are also more likely to produce sludge. This tar-like deposit builds up in the engine due to thickening from oil, carbons, and contaminants.
A combination of conventional and synthetic oils that offer better performance, lubrication, and protection of internal parts. Synthetic blend oils resist heat and do not break down as easily as conventional oils.
While synthetic blend oils cost a bit more than conventional oil, they are less expensive than full synthetic oils.
This high-quality oil originates from crude oil purified and broken down into basic molecules, with enhanced additives synthetically produced. Its formulation meets the demands of today’s higher-performance engines.
Compared to conventional oils, full synthetics are more costly. However, the cost is justified because of its improved lubricating properties, efficient removal of impurities, and longer-lasting quality.
Full synthetic oils help the engine consume less oil, are impervious to temperature changes, and do not break down easily because of their heat resistance. They also possess fewer impurities which contribute to the resistance of buildup.
Combustible engines have improved in recent years, but they’ve also become increasingly more complicated. Manufacturers have tightened leniency on compression ratios and moving parts.
Synthetic oil’s formulation is a more chemically reliable element best suited for the changes manufacturers have implemented. Synthetic oils do not produce sludge at the same rate as conventional oil. They also evaporate more slowly, don’t thicken in colder weather, and have an increased life cycle in comparison.
On older models, using conventional oil is suitable and, in some cases, recommended. Older engines can’t handle the chemical makeup and thin consistency of synthetic oils.
To determine which oil is best for your vehicle, research oil manufacturer guides, refer to your owner’s manual or visit a Sun Auto Service near you. Our knowledgeable Service Advisors and ASE-Certified Technicians will help guide you to ensure your engine utilizes the correct oil.
For more information different types of oil filters, please get in touch with us!