Does Soundproofing Foam Work To Block Noise?

Understanding the difference between Soundproofing and Sound Absorption 

Here at The Soundproofing Store we get inundated with enquiries regarding soundproofing and the best way to do this.

Whether it be soundproofing against noisy neighbours, or building your own home studio we are always asked the same question regarding soundproofing foam. "Is it good for Soundproofing?"

The short answer is No.

Unfortunately egg box type foam does not stop sound transferring through your wall from your neighbour or from leaving your room. All it will do is absorb some of the sound within your room and stop it echoing and amplifying. It will not block sound from neighbours or escaping out of your room.

To soundproof a room we need to address the below points:

Sound (noise) is normally broken down into two categories.

The most common is airborne noise such as people talking and TV noise; the second is vibration impact noise such a machines vibrating against the wall and live musical instruments

 

To soundproof a wall effectively you need to:

 

• Improve the

  mass of the wall

  - This is normally achieved by adding different high mass/density products.

However, when sound hits a wall it turns in to a vibration and an energy, so Mass alone will not solve the problem. You also need to:

• Improve the ability of the wall to

  absorb sound energy and vibration

  s

  . Without this, the addition of the mass will have very little impact.

• Use

  different materials of high mass

  . Different materials perform better for different sound frequencies, so using a combination of high mass materials will always perform better than simply using more of the same material.

• For louder more powerful sound energy you also need to

  decouple

  the new wall from the existing wall because the vibration created from this is too strong to block by connecting onto the existing structure.

Learn More Abought Soundproofing

How to stop noise coming through walls

We've highlighted that soundproofing foam definitely does not block noise from passing from room to room.

Key reasons why soundproofing foam doesn't block noise:



1. It does not add mass. Foam, regardless of how dense it is will never be made heavy enough to block sound from transferring from room to room.

2. Soundproofing foam does not offer any decoupling, meaning vibrations will continue to travel through the wall and through the foam.

3. Soundproofing foam should really be called sound absorption foam. The term soundproofing foam is misleading to many people looking to soundproof their homes.

So, if soundproofing foam is not the correct product for soundproofing a wall, what is? Below are the best sound insulation solutions when needing to block the unwanted noise from a neighbouring room. This could be any and all types of noise; neighbours TV's, loud music, conversations or even shouting.

Wall soundproofing solutions instead of acoustic foam

The most effective way to soundproof a room is to use an independent clip system like the ReductoClip System. This system delivers exceptional soundproofing and is used in both domestic properties, recording studios and home cinemas:

1. Completely isolates and decouples from the existing wall delivering an exceptional soundproofing performance

2. Absorbs high levels of sound vibration and energy

3. Adds a huge amount of mass to block airborne noise

Wall Soundproofing Learn More

Learn more about Soundproofing a Wall

So why do people buy soundproofing foam and use it? What's the point? Why do I see it on walls in images of loud music studios? 

Answer: It is there to improve the internal rooms internal acoustics. Essentially it helps to reduce Echo and Reverb within a space.

Imagine being in a room with hard surfaces, a sports hall, or village hall for example. Clap your hands in a room like this with hard surfaces and the sound appears to reverberate and echo around the space for ages. 

Do the same in a room with lots of soft furnishings and the reverberation is very limited and appears flat, with a very short continuation. 

Now imagine very bouncy basketballs being thrown around the room. You throw them everywhere, in all directions and they continue to bounce around the room.

Now imagine the walls, floor and ceiling lined with foam. You throw the balls again, only this time they hit the foam and drop to the floor stopping them from continuing to bounce, the energy from the ball has been absorbed by the foam. 

This is no different to a soundwave inside a room, it reflects and bounces off any hard surfaces, but will be absorbed by soft surfaces. This is when the ProSound room acoustic treatment systems are used. They absorb the sound and stop the reflected sound travelling back into the room.

Room acoustics BEFORE installing ProSound™ Sound Absorption Panels

Room acoustics AFTER installing ProSound™ Sound Absorption Panels

The soft material used in the panels are designed to absorb sound energy and stop this energy from bouncing around the room and reflecting off the surfaces.

Class A panels like the ones at The Soundproofing Store are tested to absorb 90-100% of sound energy that hits them. This means you require less panels in an area to achieve good results compared to lower performing foam tiles where nearly the whole surface needs to be covered to get good results.

As a general rule of thumb we look to cover around 20- 30% of the surface area of the room.

Before & After Test: With and Without Acoustic Treatment

Sound absorption will therefore improve the rooms overall noise volume and improve the clarity of the sound in the room. However, it does not ultimately stop the sound energy within the room from travelling through the structure to a neighbouring space.

There are many way of applying sound absorption to different situations such as; music studios (once soundproofed), village halls, sports halls and offices. Some of the most popular options are our ProSound Wall Panels, Ceiling Rafts and Suspended Baffles

Learn More

Share