Custom-made shapes, such as triangular, trapezoid or circular forms, are basically no problem for us to produce. Depending on the net, the only real restriction is the size of the mesh ‐ for instance, it is not possible to make a 30 mm cut in a mesh that is 100 mm wide. To obtain a non-binding offer, it is best to a simple sketch to us at or fax it to +49 (0) - 436 96 70.
Our safety nets can be produced and finished to any measurements you choose. Depending on thickness and mesh size, the maximum web width is between 10 and 20 meters and the maximum length is up to a few hundred meters. However, very large sizes such as 25 x 25 meters are also possible. In such cases, several sections of net are sewn together.
Always order safety nets in the sizes that are actually required. We'll deliver a net that fits perfectly. Make sure that you measure from one anchorage point to the next. For instance, if you plan to use 2 cm hooks for fastening the net, then you must naturally deduct 2 cm from the inside width. If the net is to be mounted evenly tensioned in a frame, please state the inside frame measurements.
The multiple options for anchoring safety nets are as diverse as their areas of application. Anchorage also depends on additional factors, such as local circumstances and the strain on the net. The simplest solution is often the best one. You can find an overview of well-proven ways to install your net on the info page Assembly Instructions . If you have any further questions or need a few tips, we're happy to advise you.
Our nets can basically be cut to size. The cut would also have no effect on the adjacent meshes. The material does not untwist any further. In this case the individual strands have to to be cut centrally and not right next to the knot .For nets that are produced with a bordered edge, this would of course be lost at the respective locations. For safety nets (especially for nets according to EN ), however, a cut is not advisable.
There is no one answer to this question, as it primarily depends on where the net is going to be used. In outdoor areas, darker nets are less noticeable than light-colored ones, as they contrast less with the background. Conversely, from a certain distance a light-colored net can appear like a wall, due to the heightened contrast. The same is true for the view to the outside (e.g. cat nets on the balcony). However, if the net is to be mounted directly in front of a white wall, white would obviously be the best choice.
In the case of thicker safety nets in indoor areas (e.g. staircase nets or loft bed nets), the color does not affect the visibility of the net. Here, you should base your decision on the colors of the surrounding area or on personal taste.
The measurements that need to be stated for the length and width refer solely to the two sides of a rectangle. You can rotate and reverse a net just as you like. It therefore doesn't make any difference which measurement you enter into which field. For instance, you can order a product measuring 300 x 500 cm or 500 x 300 cm. The delivered net or fabric would be the same in both cases.
Safety nets are one option that can be used as part of a fall protection plan. Workplaces that have the risk of falling should have a fall protection plan that outlines the policy and procedures involved in assembling, maintaining, inspecting, using, and dismantling equipment such as ladders, scaffolds, or platforms used for working at heights as well as any fall protection equipment.
Safety nets are classified as a passive fall protection system which can be installed as either a barrier to prevent a fall, or beneath the work to catch a falling worker. Safety nets are designed to decrease the fall distance, to absorb the energy of a fall, and to reduce the likelihood or seriousness of an injury.
However, safety nets do not stop the worker from falling. Installing a fixed barrier such as guardrails, opening covers, or walls are always the preferred method to prevent a worker from falling. Safety nets are most often used when it is impossible or impractical to install fixed barriers or to use an anchored and lifeline system (fall arrest system).
Occupational health and safety laws generally require action when a worker has the potential to fall about 3 metres (10 feet). Check with your jurisdiction as exact requirements do vary. Note that most jurisdictions require the use of specific fall protection measures before, or in addition to, personal protective equpment (PPE).
When deciding on the use of a safety net, check your local legislation for requirements such as:
With competitive price and timely delivery, Gold Hongye Net sincerely hope to be your supplier and partner.
Create and follow a fall protection plan that outlines the various ways fall hazards will be controlled or eliminated at each worksite. The nature of the work and the worksite itself will determine whether safety nets can be used as a fall protection method for that specifc situation. For example, a fall protection plan should specify all procedures for:
When selecting a safety net, consider:
Only use safety nets to catch falling workers when the drop area is clear. If a falling worker could come into contact with surrounding structures or objects (including sharp edges), it is a good practice to evaluate other fall protection methods that will minimize the potential for injury.
When using a safety net system:
It is good practice to:
Safety nets often catch falling debris or equipment, which impacts their ability to safely arrest a fall. If left in the net while work is ongoing, debris can damage a safety net system or become a hazard to the worker if they fall. Debris may:
Stop all work above and below the safety net to remove the fallen debris. Accumlation of snow or ice should also be removed before work can begin or continue.
When maintaining a safety net system, follow all the manufacturer's specifications. Safety nets should be checked daily, or as recommended by the manufacturer or as required by law.
Never use a safety net system with damaged components. Make sure a damaged safety net is immediately taken out of service and repaired before work continues. Safety nets can be damaged during use or storage by:
Visual inspections include checking for:
Regular testing of the safety net system includes:
Have the required person (e.g., a competent person or professional engineer) check the safety net after any impact from heavy objects or people.
Keep records of all inspections and tests performed. Also record all repairs or replacemetns, showing the date of any repairs or replacements and who did the work.
If you are looking for more details, kindly visit Safety Debris Netting.