Take the guesswork out of getting your power system optimized with the Turnigy Thrust Stand and Power Analyser v3. This handy tool lets you check out your motor/propeller combinations easily at home without needing to install anything into a model unti
Take the guesswork out of getting your power system optimized with the Turnigy Thrust Stand and Power Analyser v3. This handy tool lets you check out your motor/propeller combinations easily at home without needing to install anything into a model until you've finalized the setup.
The v3 is equipped with a full suite of analytic software to measure Volts, Amps, Watts, rpm, kv, Amp hours, Watt hours, peak Amps/Watts, min voltage and more. The backlit LCD screen displays the measured parameters in an easy to read format with the thrust value being displayed in a separate screen.
A built-in throttle control allows you to use the stand without needing your transmitter and is able to handle a wide variety of motors and measure up to 5kg of thrust to within 10g.
A unique feature of the v3 is the ability to select the number of poles to match the motor being tested via a button on the front face.
It has been designed to be as robust as possible. All components including the heavy duty mounting base are made from CNC machined aluminum alloy. Holes are provided in the base to secure it to a table or workbench easily.
Included in the box are two different sized motor mounts to take motors from 11mm up to 56mm diameter and a variety of standard sized adapters to connect the motor and ESC.
This is one piece of kit that makes you wonder how you ever managed without it!
Features:
• CNC aluminum alloy construction
• Large LCD screen displays
• Large and small motor mount adapters included
• Heavy-duty mounting base
• Power Analyser
• Motor pole selection
• Peak and real-time measurements
Specs:
Motor Size: 11~56mm
Thrust Range: 1~5000g
Increments: 1g
Accuracy: +/- 10g
Power Supply: 3V (2 x AA Batteries)
Battery input: XT60
ESC output: XT60
Dimensions: 198 x 140 x 81mm
Weight: 685g
Power Meter Specs:
Operating voltage: 0v~60V
Max current: 100A
Max Watts: 6500W
RPM displayed value: 0 ~ 999999
KV displayed value: 0 ~ 9999
Motor poles (pole pairs) selection: 2, 3, 4, 6, 7, 8, 12, 14
Included:
1 x Turnigy Thrust Stand and Power Analyser v3
2 x Motor mounts
3 x Motor extension leads (3.5mm bullet)
Selection of motor/ESC adapters
Required:
2 x AA Batteries