A Canopy of String Lights in our Backyard

02 Mar.,2023

 

Do you need RGB string lights, Patio Waterproof String Light solution? Choose us as your partner and we will provide you with a solution that will satisfy you.

Our backyard is an ongoing project. But at least we have string lights! Check out how we created a canopy of string lights in our backyard.

If you have ever seen the show Parenthood (I am obsessed) you may remember the part in the opening sequence or in the show itself where the family is gathered around the table eating dinner outside with these gorgeous string lights hanging above them. When I saw that scene I fell in love with those string lights.

I kept dropping subtle or maybe not so subtle hints to Brent about wanting lights strung up across our backyard. I wished for a canopy of lights. I believe my description to him was I want our backyard to be “dreamy”.

I have been talking about these lights for awhile now but was still completely caught off guard when Brent surprised me and for Christmas gave me this HUGE box filled with 200 feet of string lights and 200 round light bulbs.

He said he promised to make our backyard dreamy. He knows the way to my heart, I tell you.

This weekend was the first weekend in Houston since Christmas that it hasn’t rained. Since it was in the high 60’s and sunny we decided it would be a great day to create the canopy of string lights in our backyard.

It was a full day of work believe it or not to hang all those lights and Brent got them all wired up just minutes before dusk. It was down to the wire. There were a few mishaps throughout the day but as Brent always says “It’s not a Gray House Studio project if you don’t end up at some point frustrated and bleeding”. (More on that later in the post).

We obviously still have a ways to go to get out backyard completed, but for now I am one happy girl snuggling in my hammock under my canopy of lights.

How to Hang a Canopy of String Lights

We used lots of light bulbs. We had eight boxes just like this one. And we didn’t even break one.

STEP BY STEP GUIDE

1. We utilized the large pine tree that sits right along our fence line as the support for one side of the lights. Brent used our drill to make a small hole in the tree and screwed a stainless steel eye hook into the tree.

2. Even though Brent was sure there would be a wood header above the windows along the back of the house he double checked with a stud finder on the inside.

When drilling for the eye hook on the house you can see wood shavings came out indicating he was indeed drilling into wood.

3. Brent measured how much of the galvanized steel rope we needed and then we cut off the excess with a wire rope cutter.

We chose to use galvanized steel rope to bare the load of the string lights.

This should extend the life of the string lights drastically because the cable won’t stretch or break.

4. It is also easier to attach the steel cable to an eye hook than attaching the string lights to an anchor would be.

To attach the cable to the eye hook we threaded the galvanized steel rope through a ferrule.

5. Once the wire was in place we took a wire rope cutter and crimped the ferrule to make the wire secure.

6. Next, we attached the string lights to the cable. Brent uses zip ties to tie the cable and string lights together and I followed behind him and screwed in the light bulbs.

7. After we got all the lights zip tied and bulbs screwed in, Brent attached the other side of the cable to the eye hook suspending the string lights at the correct height.

8. We initially planned to have five runs of string lights from the house to the tree but realized after completing two entire runs that the odd number of runs would leave one of the two plugs at the tree instead of the house.

That was a “Doh!” moment for us. Both strings needed to plug in at the house and we recognized that wasn’t going to happen the way we were doing it so panic set in until we calmed down and had to rethink our game plan.

The solution turned out not to be too difficult. We removed one of the eye hooks and relocated the two inner eye hooks so they were spaced evenly, giving us four runs instead of five.

The one challenging part was after cutting down the second cable we had no slack cable left making it really hard to handle getting it back wrapped around the eye hook through the ferrule.

The cut wire kept poking Brent in the hands and his arms got really tired as he tried to work with the cable above his head. But he was a trooper and made it happen.

9. Because we ended up only making four runs instead of five, we had excess string light.

Brent was able to take the light on the end of the string, which caps the wires, and move it to the spot where we needed and then cut off the left over string lights.

There you have it, our canopy of string lights in our backyard!

Our backyard still has a ways to go until it is up to the Parenthood backyard standards but this is a great start and we are excited to tackle more projects for this space.

PIN IT FOR LATER

Pin

72K

73K

Shares

Want more information on RGB string lights, Patio Waterproof String Light? Click the link below to contact us.