The medical and pharmaceutical industry has shown an increasing tendency towards the use of plastic materials Cyclo Olefin Polymer (COP) and Cyclo Olefin Polymer Co. (COC) in the production of plastic Prefilled Syringes.
The low surface energy of polymer-based substrates often leads to poor adhesion of inks and coatings. To obtain optimum adhesion, it is necessary to increase the surface energy of the substrate to just above that of the material to be applied. Surface treatment with corona results in improved surface adhesion properties.
Tantec has for many years produced and developed SyrinTEC equipment for the medical and pharmaceutical industry. SyrinTEC has been further devel oped for the Prefilled Syringes market based on demand and market needs.
SyrinTEC is specially designed for optimizing the adhesion properties before printing scale onto the syringe barrels and before coating the inside of the barrel with silicone. The uniqueness of Tantec SyrinTEC for Prefilled Syringes is that treatment on the outside and inside of the syringe is accomplished in one process.
SyrinTEC uses highly durable ceramic or metal electrode elements resulting in complete and uniform treatment of the syringe barrels.
The SyrinTEC is available both as a standard unit in a low and high speed configuration for integration into existing printing lines and customized units are available for specific printing applications. For more information, visit: https://tantec.com/corona-treatment-of-syringes-syrintec.html or contact the sales department at Tantec:
Kim Saabye
Phone: +45 76 84 08 45
E-mail: [email protected]
Morten Thrane
Phone: +45 76 84 08 41
E-mail: [email protected]
If you have any questions on Metal Syringe. We will give the professional answers to your questions.