The iridescent appearance and sleek feel of the RALART Mirror Glass Mosaic lends itself to match perfectly with your bathroom, kitchen or any space desire for a chic yet elegant look.
The iridescent appearance and sleek feel of the RALART Mirror Glass Mosaic lends itself to match perfectly with your bathroom, kitchen or any space desire for a chic yet elegant look.
Our Silver Bling Mirror Glass Mosaic Tile is made of mirror glass chips. After going through the high-temperature kiln, the mosaics become very durable. The back of our product is mesh mounted so it is easy for cutting. The color of this mosaic tile is multitudinous. While producing this glass tile, we used special techniques to make the mosaic look like a shining diamond. It is highly recommended for the salon, bar, bathtub, bathroom, wall decor, and kitchen backsplash.
To initiate the bond coat, use the flat side of a trowel and firmly apply a thinset to the substrate.
To establish the proper depth of the setting bed, use a 3/16” x 1/4” v-notch trowel to apply additional thin-set and comb full notches in one direction.
Use the flat side of the trowel to flatten the notches and achieve a smooth, consistent thinset setting bed.
Apply mosaic sheets to the thinset setting bed, tape side towards you, with light, even pressure. When joining sheets, be certain to adjust sheets so that grout lines are uniform. Periodically, check thinset for skinning (slight drying). If skinning occurs, remove thinset and reapply.
To achieve the flattest possible surface, lightly tap the sheets using light pressure with a grout float or a wooden beating block and a finish hammer. To unify sheet transitions, tap from one sheet to the next.
After the thinset has cured, slowly peel the face mounting tape from the tile starting from the corner. Use an angled downward movement.